Qingzhou Runxing Hydraulic Parts Factory

13365368128

670145107@qq.com

Products

Qingzhou Runxing Hydraulic Parts Factory
Contact: Manager Zhou
Contact number: 13365368128
Fixed line: 0536-3805798
Address: North Head of Middle Section of Xihuan Road, Qingzhou
邮箱:670145107@qq.com

gear pumps
gear pumps
gear pumps

The gear oil pump is an industrial equipment used to transport liquids with lubricating properties. The common oil pumps on the market are those that transport liquids no higher than seventy degrees Celsius. Choose appropriate materials that can withstand high temperatures.

Working principle of gear oil pump:

It is carried out by the principle of the mutual meshing rotation of the two gears, and there is no high requirement for the medium. There is a pair of slewing gears in the pump body, which constitute the main part of the oil pump work, because these two gears are a driving gear and a passive gear, and then the two gears can mesh with each other, and the working cavity inside the oil pump Divided into two separate parts. The gear oil pump drives the passive gear to rotate through the rotation of the driving gear. When the gear is from the engaged state to the disengaged state, a partial vacuum will be formed on the suction side to suck the liquid into it. The sucked liquid fills the tooth valley of the gear and is then brought to the discharge side. When the gear enters the mesh, the liquid is squeezed out, forming a high-pressure liquid and discharged out of the pump through the pump discharge port.

0010010 nbsp;

0010010 nbsp;

Previous: No Information

下一条: Gear oil pump manufacturer